CT Element Indoor Sauna

Your site

• A reasonably level concrete or tile floor is recommended; avoid timber and engineered floors, which don't like the heat, humidity and occasional spills.
• Plan where the heater's power will come from before choosing a position.
• Indoor use with electric heaters only; it ships as panels, and the walls leave room to route electrical components.
• Its assembly instructions are image-only documents; we go through installation with you before ordering.

Assembly

• Supplied as a kit with step-by-step assembly instructions; the manufacturer recommends two people.
• The heater must be wired by a licensed electrician. For Australia, we confirm a heater that suits Australian supply.
• Before first use, the heater is run on high for about an hour to burn off manufacturing residues.

Care and warranty

• After each session, leave the door open to dry the room, wipe the benches and take wet towels out.
• Clean with mild soap or a sauna cleaner; no bleach, chlorine, ammonia, abrasive pads or pressure washer inside.
• Leave interior timber natural, or use only a sauna-specific oil. Never paint, varnish or stain inside.

LeisureCraft's published warranty covers products it makes for five years against defects under normal residential use, from delivery to the original owner. It provides replacement parts only (no labour or installation), and it can be voided by improper installation, maintenance or electrical work. Heaters carry their own maker's warranty. We confirm current terms when you order, and talk to us first about any commercial use.